All woodworking tasks can be done thanks to the miter saws because it is a basic tool for the operations of lumbers. You can complete cutting work with its cross-cut, angles cut, bevel cut, as well as crown molding. A good saw represents clean and precise cuts with responsibility also easy to use. But you must evaluate the features if a saw has a powerful motor, a lengthy blade, a high capacity of cuts, also can molding so then you can use it for heavy-duty or professionally.
But how you can select the best miter saw for crown molding, is very difficult for a person because there are a lot of options, you can’t pick a capable saw without wasting a lot of time.
So after a lot of struggle, we have completed our research and collected some products which meet every standard of cutting especially for molding cuts. If you are trying to purchase a saw so without thinking and wasting time you can get a magnificent device from our list.
Top 9 Best Miter Saw for Crown Molding
- Top 9 Best Miter Saw for Crown Molding
- 1.Dewalt Compound Miter Saw (DWS716XPS)
- 2.Bosch (DCM12SD) Sliding Miter Saw
- 3.Skilsaw (SPT88-01) Sliding Miter Saw
- 4.Cruzer Miter Saw 12 Inch
- 5.WEN 10 Inch Sliding Compound Miter Saw
- 6.Dewalt (DWS709) 12 Inch Miter Saw
- 7.Metabo HPT 12 Inch Compound Miter Saw
- 8.Hitachi C8FSE Sliding Compound Miter Saw
- 9.Craftsman V20 Sliding Miter Saw
1.Dewalt Compound Miter Saw (DWS716XPS)
Mostly usable miter saw the Dewalt has fixed a 15 Amp powerful motor that can cut the hardboard under the surveillance of LED light which provides free cutline indications. The miter detent plates make work easier and increase productivity by ensuring cuts with 14 positive stops. The crown molding is the biggest feature of this unit, the tall sliding fence allows up to 6-5/8 inch crown molding nested and 6-1/2 inch vertical molding capacity against the fence. The saw offers cross-cut up to 2 × 8-inch lumber at 90 degrees and also can crosscut 2 × 6-inch dimensional lumber at 45 degrees.
The tool comes with a dual bevel which allows cutting 0 to 48 degrees to the left/right with positive stops at 0, 33.9, 45, and 48 degrees. There is available a bevel scale for adjustment of bevel 0 to 50 degrees on both sides. This 12″ inch saw determined with 49 pounds also has a carry handle, headlock system, and down pin.
- 12″ Carbide tipped blade
- Vertical clamp
- Durable 3,800 RPM speed
- 6-5/8-inch crown molding capacity
- Dual bevel with positive stops
- Miter detent plate made with stainless steel
- LED light improves cutting productivity
- Dust bag requires increasing
- Little bulky
2.Bosch (DCM12SD) Sliding Miter Saw
The 65 pounds Bosch saw is one of the best tools for overall wood-cutting tasks and also the best miter saw for crown molding. This model is made with glide systems that allow wider cross-cut and provides precise alignments also saving a 12-inch valuable workspace. The saw offers an incredible cutting capacity. The horizontal capacity is up to 14-inch similarly the vertical capacity against the fence base is up to 6-1/2-inch and the crown capacity against the fences is also 6-1/2 inches. The miter and bevel scale offers easy adjustment with marked detents and roof pitch angles.
The bevel detents can be set at 0, 33.9, and 45 degrees left/right for healthy cuts. This unit is extremely easy to use because it has a bevel lock lever and range selector that is attached upfront to the saw for quick adjustment of the bevel and can cut wood as well as laminate. The dust collection port is motivated by 90 % debris. This corded tool has 65 pounds of weight also a 12-inch blade length.
- Miter Saw-blade
- Suitable for versatile uses
- Squire lock systems increase productivity
- Also available bevel lock lever for easy bevel setup
- Save 12-inch valuable work-space
- Weight 65 pounds
3.Skilsaw (SPT88-01) Sliding Miter Saw
The Skilsaw SPT88-01 is an easily transported machine and easy to flip down due to the top handle. It is a dual-bevel device and provides an expanded capacity of cuts with greater flexibility. Also for more accuracy, there is accessible bevel stops at 0 and 45 degrees. This saw has a 15 AMP dual field motor and doesn’t get worming also increases work efficiency. The tool allows you to any cut that has needed for the job with 4 × 14 cross-cutting capacity and provides smoothness. This unit has a LED light system that is greater than a laser because it gives full clarity to the cut-line location.
The product is constructed with 51 pounds and 31.25 x 19 x 20 inches is the dimensions of this item. This warm drive machine supports only AC power and runs on 120 volts of electricity. Besides that, the saw offers a bunch of features to do heavy projects with convenience.
- 60 tooth carbide blade
- 2 Crown stops
- Dust elbow
- 2 Size Allen wrench
- Miter lock knob
- 180 Days stay true warranty and 1-year limited warranty
- 15 AMP dual-field motor
- Increases crown molding capacity
- Dual bevel with bevel stops
- 4 x 14-inch cross-cutting capacity
- The saw does not included a stand
4.Cruzer Miter Saw 12 Inch
Cruzer miter saw offers an incredible capacity for overall cutting and a 12-inch blade allows being versatility. The tool can be applied for professional use as well as entertain long terms projects in a short duration. The saw consists of a laser that provides a shadow to the cut line and allows a specific cut. It can easily cut 7-1/2 inch crowns and 6-1/2 inch standing base molding with quickness. The bevel offers cuts in both directions up to 47 degrees with front bevel release and 7 positive stops at the most used bevel angles. The miter-cutting capacity is also incredible and makes cuts up to 50 degrees to the left and 60 degrees to the right with the help of 10 miter detents and positive stops.
The 15 AMP motor delivers an impressionable speed for a powerful cut. The saw has a blade brake that stops the blade within two seconds and provides safety. The front miter can be controlled with one hand by the push button and the miter detent override and bevel release for quick performance.
- Extension arm
- 5-Year limited warranty
- Mostly used for crown molding as well as for professional
- Bevel cuts both sides at 47 degrees
- 18-inch cross-cutting capacity
- Blade brake system for safety
- Front miter controls with one hand
- Bulky designed
5.WEN 10 Inch Sliding Compound Miter Saw
The most selected tool the WEN is the best miter saw for crown molding up to 7-1/2-inch nested capacity and also the 6-3/4-inch base-board vertical capacity. The overall features of this model are directly affected and improved accuracy. Without a laser ensuring alignment is impossible, therefore the machine is designed with a laser guide to take the precise cut-line. The device has an appreciable 15 AMP motor that maintains a high speed and cuts boards up 12 inches wide also can cut 3-1/2-inch thick lumbers with precision.
The incredible miter cuts capacity allows cut up 45 degrees in either direction with 9 positive stops feature and the bevel moves to the left up to 45 degrees. The 37.8 pounds weight improved the portability. Similarly, due to the 20.7 x 20.6 x 16 inches dimensions, the machine will be put on a little area.
- 10-inch 40-tooth carbide-tipped blade
- Two table extensions
- One clamp assembly
- Dust-bag and dust port adapter
- 15 AMP and compound
- Two years warranty
- Feature 9 miter stops
- The laser provides quickness in cuts
- Bevel can’t cut to the right
- Blade-less than 12-inch
6.Dewalt (DWS709) 12 Inch Miter Saw
According to the specification, the Dewalt DWS709 is a flawless unit that has a lot of features for perfect operations of the hardest woods. It is a resourceful tool for heavy projects because it has a tall sliding fence that supports crown molding up to 5-1/2-inch nested and base molding vertically against the fence up to 4-1/2-inch. The saw is embodied with a 15 AMP motor that is sufficient for cuts up to 2 × 14-inch dimensional lumber at 90 degrees and 2 × 10 at 45 degrees. An adjustable stainless steel miter detent plate with 10 positive stops increases productivity.
The range of miter cut up to 60 degrees to the right and 50 degrees to the left and improved accuracy. And the oversized bevel scale helps in the correct adjustment of bevel angles. The tool comes with 51 pounds of weight and is easy to transport also offers a 3-year warranty.
- DWS709 Miter Saw
- 15 AMP motor produces 3,800 RPM speed
- 10 positive stops and miter detent plates
- Ideal for crown molding
- Bevel scale provides easiness
- No laser guide
7.Metabo HPT 12 Inch Compound Miter Saw
The Metabo HPT has positive stops that actuated with the thumb and allows quick adjustment to miter angles for fast delivery. The miter scale offers 0-52 degrees ranges left/right for precise broader range cutting of boards. 15 AMP motor stands for high capacity power with a 1,950 W output power smoothly passes easily through hardboard or hardwood. There is a magnificent feature that it has a dual bevel as well as a micro-bevel system when the major bevel angle is secured the micro-bevel adjustment knob, provides precise angles.
This is marvelous and the best miter saw for crown molding. The tall pivoting aluminum fence height is 5-1/8 inches and allows for crown molding to be cut vertically with quickness. Also, the corded electric power tool is covered 59.7 pounds as well as the tool dimensions are 26.9 x 22.2 x 21.3 inches.
- C12FDHS miter saw
- 12-inch 32T TCT saw blade
- Vice assembly
- Box wrench
- Hex bar wrench
- Available major bevel and micro bevel
- 5-year long-time warranty
- Laser maker system
- 5-1/8-inch height fence
- No expensive
- Bulky design of 59.7 pounds weight
8.Hitachi C8FSE Sliding Compound Miter Saw
The very lightest class consists of only 31 pounds and also has a vertical soft handle that reduces vibrations with an elastomer grip. The large pivoting fence and table give better support while cutting crown molding lying flat also provides better productivity. Some positive stops at 15, 22.5, 31.6, and 45 degrees in both directions for quick and easy miter adjustment, Also external accessible carbon brush is provided for easy changing brush quickly and saves time. The tool allows versatility and the 9.2 AMP motor generates high power 5,500 RPM no-loaded speed for smooth operations.
The 8-1/2-inch sliding blade provides ensure, smooth, miter and cross-cut, trimming, and crown molding in a variety of workpieces. The overall plenty of features help you to cut different types and the splinter guard behind the fence controls tear-out for clean.
- 8-1/2-inch TCT saw blade
- Vise assembly
- Box wrench
- Sub Fence
- Light-weight only 31 pounds
- No vibration due to the elastomer grip
- Large pivoting fence and table for better support
- 5,500 RPM speed can cut wider lumbers
- Blade 8-1/2-inch
- 9.2 AMP motor
9.Craftsman V20 Sliding Miter Saw
The cordless v20 unit offers outstanding performance like a corded tool. The speed reaches up to 3,800 RPM and can cut 2× dimensional lumber, hardwood, and baseboard, as well as trim with softness. It has an incredible cutting capacity and allows cross-cut for 8-inch lumber at 90 degrees and 5.5-inch lumber cross-cutting at 45 degrees with ensure. This lightweight unit comes with 21.8 lbs also the side carry handle helps in portability to around area. the craftsman miter saw offers 3-5/8-inch nested crown cuts and 3-1/2-inch baseboards vertically with convenience.
The machine has included a long-life lithium-ion battery that allows you to work without hassles for long periods. The LED light releases a shadow and provides clarity to the workpiece for the cinch cut-line. The saw runs quieter and you can complete long-term projects without interruption using this model.
- CMCS714 7-1/4-IN Sliding Miter Saw
- 4.0AH lithium-ion battery
- 20V lithium-ion fast charger
- Carbide-tipped blade
- Blade wrench
- Material clamp
- Usable for anywhere without a cord
- It makes above than 300 cuts
- The tool recovered within 3-year limited warranty
- The side carry handles make the unit extremely portable
- The 7-1/4-inch blade can’t cut the thickest lumbers
The crown molding is a main key feature of a saw but overall has a different capacity for crown cuts. Most miter saws have a 4-1/2 to 7-5/8-inch crown molding cutting capacity. You can use it as a professional or DIY project.
But there are other basic features that a saw should have for crown cuts, such as a powerful motor, a lengthy blade, a tall sliding fence, etc.
Overall woodworking tasks depend on the power of the saw, Whether you need to cut hardwood or baseboard in this matter the power improves the quality of your cutting as well as provides a smooth cut without any damage. Also, that meets a variety of valuable cuts and increases the crown cut performance. So before the purchase, you must consider powers.
Blade & Size
The size of the saw determined the blade diameter which usually comes from 7-1/4-inch to 12-inch. The diameter of the blade adjudicates how broad and thick lumber can be cut. A blade can cut the wood on its diameter base. due to the full-size blade, you can able to cut the extra wider materials because it covers the wider materials easily.
Maybe you checked out my post and all the product specifications. I hope my article on the best miter saw for crown molding will be beneficial for you. Because in this review we have explained each product separately and informed you of the features. But crown molding is the most challenging task in woodworking and overall saws can’t be able to crown molding. Basically, crown molding requires a few more powerful features that permit molding for precise cutting.
whether, if you are searching for a saw for crown molding you have come to the right place because here we added perfect and durable products for crown molding. You can easily select a capable saw from here.