Often people can’t afford to buy the reason of high prices. Because it is difficult for working-class people to buy something expensive. Either they ask for a loan from someone and put more burden on their head or it takes a long time to raise money for it. So it is a rule of every company that they make goods from cheap to high prices in every product. As a result, people can buy easily.
Alike that, a saw is also an expensive machine for indigent people, especially for a carpenter. Because they need to have a miter saw to handle their cutting work daily. The saws come at different prices but here we collected only The Best budget & cheap Miter Saw for your benefit. If you working as a hobbyist or your work may not be massive. So the following we listed out the top inexpensive items that are suitable for your tasks.
The 9 Best Budget & Cheap Miter Saw 2023 Reviews
- The 9 Best Budget & Cheap Miter Saw 2023 Reviews
- 1. Craftsman (CMSC714M1) 7-1/4 Inch Sliding Miter Saw
- 2.Metabo HTP (C10FCGS) 10 Inch Comp0und Saw
- 3.Delta Power (S26-263L) Slide Miter Saw
- 4.Genesis (GMSDR1015LC) 10 Inch Compound Saw
- 5.Dewalt (DWS715) 12 Inch Compound Miter Saw
- 6.Skil (3821-01) 12 Inch Compound Saw
- 7.TACKLIFE (EMS01A) Compound Sliding Saw
- 8.Hitachi (C10FCG) 10 Inch Compound Miter Saw
- 9.Kobalt 7-1/4 Inch Sliding Compound Miter Saw
1. Craftsman (CMSC714M1) 7-1/4 Inch Sliding Miter Saw
An ideal saw the Craftsman part of the v20 cordless system is a weapon for hardwood, baseboard, and trim cutting. Included a 7-1/4 inch blade that can cut the dimensional lumber up to 2× with a no-load speed of 3,800 RPM. The sliding capacity of cross-cuts confesses for 8-inch lumber at 90° and allows 5.5 inches cross-cut at 45°. The nested crown cutting capacity is maximal up to 3-5/8 inches and the baseboard vertical capacity is 3-1/2 inches for accessible cuts. The capacity of the miter cuts a maximum of 45° with 3.5 thickness and provides reliable cuts.
The biggest feature is in this miter saw it weighs very little. It’s prepared with 21.8 lbs and is easy to pick up. The machine’s width is 25.5, the length is 18.9 and the height is 14.4 inches. It comes with 9 casted miter detent stops which can help in the accurate cutting of different angles. supported a 3-year limited warranty.
- carbide-tipped blade
- Blade Wrench
- Material Clamp
- Lithium ION Battery
- Lithium fast Charger
- Included battery
- Easy transported
- Dust handling port
- Variable speed
- No laser guide
- No compound
- Without electric brake
2.Metabo HTP (C10FCGS) 10 Inch Comp0und Saw
The Metabo 10″ inch compound Best budget and cheap miter saw delivers excellent performance in overall wood cutting. Because it has multiple features for the operation of lumber. It offers a good miter angle range up to 52° on both sides for more flexibility. The single bevel is used only to the left and the range of bevel maximum is up to 45° with an adjustable bevel stop, which helps to do the right cuts. Cutting hardwood requires more strength, therefore, this device includes a 15 RPM powerful motor that delivers a magnificent speed for the toughest cuts.
A large size table with a vice clamp system is available with the saw for the material support and handle workpiece. It has positive stops that activate with the thumb for the quick setting of miter angles. A dust collector is attached for the arrangement of particles. As required you can repair this machine within 5 years.
- 10″ 24T TCT saw blade
- Hex. bar wrench (5mm)
- Warranty more than other saws
- Thumb-actuated positive stops
- Bevel stops for precision cuts
- No double bevel
- Only 24 Tooth blade
3.Delta Power (S26-263L) Slide Miter Saw
The Delta shop master 10″ inch miter saw is chiefly designed for smooth cutting. This unit is extremely lightweight comes at 30 pounds and is easy to carry from room to room and is also for long traveling. It has to command to complete many woodworking projects with the source of a powerful 15 AMP motor, which gives 5,500 RPM speed. This saw included a spindle lock system that holds the spindle firmly, it can be used while the bade nut is loosened and removed. The bevel reaches up to 45° and cuts nominal 2×12″ inch lumber with a full bevel.
This machine has a laser with an on/off button that guides you in a straight-cut line. The blade of some miter saw spanning for 12 seconds after releasing the switch can be dangerous for you, so this device has added an electric brake for the quick stops of the blade within 1 second when switched off. The extensible table gives support to the large workpiece.
- Miter saw
- Spindle lock system
- Large workpiece supported
- Laser for convenient and precise cuts
- Weight only 15.9 pounds
- Dust collector not good
- Blade 10″ inch
4.Genesis (GMSDR1015LC) 10 Inch Compound Saw
The Genesis is the best budget and cheap miter saw, used for crown molding, shadow boxes, picture frames, and more precise cuts. It has the experience of miter cuts up to 45° to the left and right, and also bevel cuts maximum of up to 45° but bevel only cuts the left side. The 10-inch blade consists of 60 teeth that spin at 4,800 RPM speed and cut wood easily. Also, put a laser light for guidelines and enhanced accuracy of cutting. The blades stop within one second due to the electric brake and the spindle lock gives support to the spindle while changing the blade.
It requires a battery for the laser light which is also included in this saw and also 120 volts of electricity is needed for this machine. This product’s net weight is 40 lbs and is made with a solid die-cast aluminum base.
- 60T carbide-tipped blade
- Arbor wrench
- Owner’s manual
- Battery included
- 60T blade
- Dust bag for extra particles
- Electric brake
- Extension wings
- Laser no electric powered
- Bevel work one direction
- 45° miter cuts only
5.Dewalt (DWS715) 12 Inch Compound Miter Saw
A miter saw that has a 15 AMP motor can do woodworking projects in a short duration because the powerful motor offers amazing speed and delivers quickness and durability in cutting. The miter detent plate conduct increases productivity and improves cutting accuracy, also adjustable miter detent is made of stainless steel with 14 positive stops. It has tall sliding fences that give support to crown molding nested maximum up to 5-1/4 inches and vertically against the fence support base molding up to 6-1/2 inches. The cross-cutting capacity reaches up to 2×8 inch dimensional lumber at 90° and cuts the 2×6 inch dimensional lumber at 45°.
The machined base fence delivers support to the fence for standing with the blade, So that the blade can cut well. This machine bevels to the left maximum up to 48° and the right side up to 3° nominal with positive stops at 0°, 45°. It’s an electric power machine and comes with 42.8 pounds weight.
- 12″ inch carbide tipped blade
- Vertical clamp
- 14 positive stops
- Tall sliding fences
- Best cross-cut capacity
- 15 Amp motor delivers high speed
- No laser guideline
- Bit heavy
6.Skil (3821-01) 12 Inch Compound Saw
Skil compound saws are made with amazing features and all offer excellent results while cutting. This machine is extremely easy to use because it is designed with easy functions and is 42.5 lbs weight. Also, for accurate and precise cuts add a laser that will guide you to the straight cutline. The blade’s length is 12″ inches, and it can cut 3.5-inch thick lumber at 4,500 RPM speed and provides quickness in work. The miter cuts arrive at a maximum of up to 45° to the left and also right side with 9 positive stops for taking easy angles. But this device is made with a single bevel, it can cut the lumber only to the left direction up to 47°.
This best cheap miter saw has available an extensible table for the management of long and large workpieces. The quick mountain system helps for quick and easy setup on the miter saw stand. It is an electric power machine and includes a 15 Amp motor which drives with 120 volts of electricity.
- Table with left/right extension rail
- 12″ inch blade length
- Included laser for guideline
- Positive stops
- No included dust-bag
7.TACKLIFE (EMS01A) Compound Sliding Saw
If you want a miter saw that has a double speed and includes 3 blades, the Tacklife saw offers both features. It comes with double speeds of 3,200 RPM and 4,500 RPM, You can use the high speed for the wood cutting and lower speed for the metal, and the speed can change with a single press of the switch. The range of bevels up to 45 degrees permits you to increase versatility in work. The miter cuts reach up to 45° in both directions with 5 positive stops. The laser will guide you to the correct position cutline and allows for convenient and precise cuts, Also the blades are used for different materials cutting two blades which consist of 40 teeth used for wood and plastic cutting, and one blade which consists of 48 teeth for versatile use.
The protection of the blade also included a saw shield made with solid iron, which covers the blade teeth and prevents accidents. A dust bag is attached directly to the saw, which collects the dust while cutting and keep the location clean. The extension table with a vice clamp offers good support to the material and maintains balance during the cutting.
- Three blades
- Clamping device
- Allen wrench
- User manual
- 24 months warranty card
- Double speed for different materials
- 3 blades
- Solid iron shield for covered blades
- Speed convert with a single-press switch
- Extension table
- Few positive stops
- Without electric brake
8.Hitachi (C10FCG) 10 Inch Compound Miter Saw
Overall, the Hitachi miter saws are suitable for hard woodworking and are made up of beautiful features. it has the ability to override other machines. This is an electric power Best budget & cheap miter saw which required 120 volts power. Also easy to portable because it is a lightweight design with 24.02 pounds. The bevel does not work on the double side, It works on the left side from 0°-45° with precision cuts and positive stops that are controlled with the thumb for fast adjustment of the miter. The miter’s angle range is equal to the left and right up to 52° for increasing flexibility.
Also, added a 15 Amp motor which supplies a high power 5,000 RPM speed for hard cutting tasks, and also provided a dust-bag for the gathering of airborne particles, so that the surrounding environment is clean. The consumer can’t handle long lumber while cutting because this saw is involved in a large table with a vice clamping system for the supporting large and long workpiece.
- Vise assembly
- Hex. bar Wrench
- Excellent bevel range
- No-load speed 5,000 RPM
- Easy portable
- Dust collection
- Positive stops
- Without a Discount
- No laser-light for guideline
9.Kobalt 7-1/4 Inch Sliding Compound Miter Saw
Although, the size of the blade is 7-1/4 inches. But it has the potential of cutting to be like other miter saws. and it doesn’t take up much space because it’s small in terms of dimensionality. Also, the weight is under 30 pounds since it is formed with solid die-cast aluminum. It can crosscut up to 2×8″ inch wood without hindrance, also perfect for molding and framing cutting. Often people draw a line with a pen for the cutting in the right direction, so sometimes it does not guide you in the right way because the manufacturer designed this machine with a vertically mounted laser, which you can reach with the help of a laser to the main point of the precise cutline.
The positive miter stops and bevel stops are other magnificent features of the saw for the exact position of most used common angles. The double sliding rail and linear bearing offer an exemplary performance for effortless and authentic cutting of lumbers. The saw was built in blue and silver colors.
- Excellent crosscut capacity
- Made with die-cast aluminum
- AC power supported
- Not suitable for the heavy project
We checked out all brands of miter saws but finally, we have represented the cheapest items for those people who work as an amateur, home base, or projects. But the best budget & cheap miter saw does not mean that it is weaker than other saws, It has only a short-cutting range. But in terms of motor and speed, they are the same. the expensive machines are different from these machines due to the just double bevel, and blade size which supports large lumber. now, how do you know which machine is best for you? So you look at the nature of your work and shop accordingly.
The durable, precise, and smooth cutting requires high power because the power is a significant feature of a miter saw. These machines usually come with a 15 Amp motor which is suitable for it. But It needs at least 120 volts of electricity. So it is better not to run it on a generator or low voltage so that your goal is well accomplished. however, if your job is to cut meager wood, you can use a low-power device but they also cause damage to the lumbers.
You may know that every miter saw blade is not the same, there is a difference between them, They can vary in size. Besides, a basic feature of the blade is that it consists of 40 to 80 teeth. The larger blade has more teeth and the smaller blades have fewer teeth. But there can be no better than 10″ or 12″ inches for smooth and convenient cutting. If you want a saw or you have a saw and you want to buy a blade for it you will purchase the based on these basic features.
Weight & Size
A person requires a miter saw, so first of all, he should consider its weight and size. Because the overall woodcutter machines are separated in weight and size from each other. Some of these are capable of being carried to another place it is mostly under 25-60 pounds and the heaviest device is almost up to 90 pounds, but it can’t be transported to around area due to the overweight. You can use it at the shop so that you don’t have to pick it up again.
Everything in the world that man has made, he has discovered through some of the devices. Similarly, whatever wooden equipment is around you, such as doors, windows, furniture, etc. All appliances are also made of different types of tools. But the most important factor in making these goods is a miter saw because woodworking requires cuts. If the wood is small in size, you can easily cut it by hand. Besides that, cutting large wood, cross-cutting, or cutting at different angles, is impossible without a woodcutting machine. Because everything has to be made to a certain size and the cuts have to be made accordingly. So that there is no gap left in its formation, you can only do this with a saw. Therefore if you desire this machine, we hope that because of our reviews, you will be able to get any machine easily. We’ve put the best cheap miter saws in front of you which are in the range of people.