As you know, the miter saw is the most powerful and basic tool for woodworking. But you can use them perfectly when it is able to operate on every point. You must consider cleaning it and will know how to clean a miter saw.
Due to the overuse of some miter saws, it rusts or accumulates dust, and sometime else you need to clean them well for a healthy cut.
When your saw catches extra debris and covers the parts of the saw so it can be dangerous for a good cut. So, in this case, you should clean the dust area.
For great clearance, you will take an air compressor to remove dust with clarity.
Though you can do that by hand but may it is possible remain some debris and may your real purpose not be fulfilled.
Besides that, sometimes even some debris gets stuck in the teeth, you should also take a look at it and clean the all teeth one by one carefully that you will cut smoothly.
After finishing the dust removal you will start the rust removal and try to clean up any part of the miter saw that has rust on it by the source of some tools or materials.
There are two types of elements available in the market that will remove the rust very well.
The rust spry is the easiest way to clean the tools fast. Just once you spry on the rusted area, after a few seconds the rust will become soft then you would remove it with a silky cloth or tissues.
you can buy the rust spry from anywhere easily.
Wire Cup Brush
The wire cup brush is made up of hard wire which is usually put in a drill machine.
Once you put it in the drill so then start the drill and rub the rusted part with the brush.
Remember, to drive the drill slowly so that it doesn’t slip out of your hands.